home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Games Collection 1
/
software vault.zip
/
software vault
/
CDR09
/
WSC25.ZIP
/
HELP.WSC
< prev
next >
Wrap
Text File
|
1993-04-02
|
31KB
|
753 lines
-ABOUT WSC-
╔══════════════════════════════════════╗
║ Word Search Creator (TM) Version 2.5 ║
║ ║
║ Copyright(c) 1993 by John Owen ║
║ ║
║ All Rights Reserved ║
╚══════════════════════════════════════╝
Word Search Creator (TM) is marketed by Owen Associates under the
Shareware concept. It is not Freeware, nor is it Puplic Domain. Under
the terms of the Shareware marketing concept, you are encouraged to try
the software before you buy it. You may try the software for a
reasonable period (not more than 30 days). After the 30 day period, if
you continue to use the software, you MUST register it.
WSC.EXE WSC.SCR
REGISTER.EXE HELP.WSC
READ1ST.DOC MANUAL.DOC
VENDOR.DOC NEWVER.DOC
If any of the above files are missing or corrupted in any way, send
$3.00 ( $6.00 from outside the USA) to:
Owen Associates
PO Box 307
New Milford, CT 06776,USA
You will receive a complete shareware review copy.Be sure to request
WSC, and type or print your name and address clearly. Also disk size
(5 1/4 or 3 1/2).
DISCLAIMER - AGREEMENT
Users of Word Search Creator (TM) must accept this disclaimer of
warranty: "Word Search Creator (TM) Version 2.5 is supplied as is.The
author disclaims all warranties, expressed or implied, including,
without limitation, the warranties of merchantability and of fitnessfor
any purpose. The author assumes no liability for damages, direct or
consequential, which may result from the use of Word Search Creator (TM)
Version 2.5."
Word Search Creator (TM) is a "shareware program" and is provided at no
charge to the user for evaluation. Feel free to share it with your
friends, but please do not give it away altered or as part of another
system. The essence of "user-supported" software is to provide personal
computer users with quality software without high prices, and yet to
provide incentive for programmers to continue to develop new products.
If you find this program useful and find that you are using Word Search
Creator (TM) and continue to use Word Search Creator (TM) after a
reasonable trial period, you must register.
Commercial users of Word Search Creator (TM) must register and pay for
their copies of Word Search Creator (TM) within 30 days of first use or
their license is withdrawn. Site-License arrangements may be made by
contacting:
OWEN ASSOCIATES
PO Box 307
New Milford,CT 06776
Voice phone (203) 350 - 2194
or
CIS Email to John Owen 71613,3027
Anyone distributing Word Search Creator (TM) for any kind of
remuneration must first contact OWEN ASSOCIATES at the address above for
authorization. This authorization will be automatically granted to
distributors recognized by the (ASP) as adhering to its guidelines for
shareware distributors, and such distributors may begin offering Word
Search Creator (TM) immediately (However OWEN ASSOCIATES must still be
advised so that the distributor can be kept up-to-date with the latest
version of Word Search Creator (TM).).
You are encouraged to pass a copy of Word Search Creator (TM) along to
your friends for evaluation. Please encourage them to register their
copy if they find that they can use it. All registered users will
receive a copy of the latest version of Word Search Creator (TM) and a
large, bound and illustrated Manual. The registered versions of Word
Search Creator (TM) do not contain the red warning screen. Also, while
the file MANUAL.DOC is complete, and covers all functions and procedures
in the operation of Word Search Creator (TM), the printed manual gives
more in-depth detail, examples and illustrations.
TO REGISTER
To obtain your REGISTERED copy of the LATEST VERSION of Word Search
Creator (TM) send a check or money order $29.00 (USA and CANADA)
$31.00 (OVERSEAS), ($25.00 plus P&H) to:
OWEN ASSOCIATES
PO Box 307
New Milford, CT 06776, USA
Please type or print clearly your name, address, and disk size(3 1/2
or 5 1/4).
Or type REGISTER at the prompt to automatically print a registration
form.
-----------------------------------------------------------------------
CREDIT CARD ORDERS ONLY -
You can order with MC, Visa, Amex, or Discover from Public (software)
Library by calling 800-2424-PsL or 713-524-6394 or by FAX to
713-524-6398 or by CIS Email to 71355,470. You can also mail credit card
orders to PsL at P.O.Box 35705, Houston, TX 77235-5705. Refer to product
#10812 Word Search Creator, and specify disk size.
THE ABOVE NUMBERS ARE FOR ORDERS ONLY.
Any questions about the status of the shipment of the order, refunds,
registration options, product details, technical support, volume
discounts, dealer pricing, site licenses, etc, must be directed to:
Owen Associates
PO Box 307
New Milford, CT 06776, USA
Voice phone (203) 350 - 2194 or CIS Email to John Owen 71613,3027
"To insure that you get the latest version, PsL will notify us the day
of your order and we will ship the product directly to you."
-----------------------------------------------------------------------
-GETTING STARTED-
Word Search Creator(TM) gives you complete control over the creation of
a word search puzzle. You may enter words where ever you like in the
puzzle manually or let Word Search Creator (TM) automatically place your
words for you. You may also save a puzzle to finish or edit later. When
you are finished entering words, press F5 and the blank spaces will be
filled with random letters. You are now ready to save or print your
puzzle.
-CREATE PUZZLE-
Word Search Creator (TM) allows you complete control over creating your
word search puzzles. To begin entering a word, you must first select a
direction function for the word. You choose a direction by pressing one
of the function keys that are listed in a box on the left side of the
screen. You may also select the Direction Keys pop-up menu with a mouse
or the Alt D key combination. Using the mouse or arrow keys, highlite
the desired direction and click the left mouse button or press enter.
The directions are:
MANUAL:
F1 = HORIZONTAL F2 = VERTICAL
F3 = DIAGONAL_UP F4 = DIAGONAL_DN
ALT F1 = REVERSE HORIZONTAL ALT F2 = REVERSE VERTICAL
ALT F3 = REVERSE DIAGONAL_UP ALT F4 = REVERSE DIAGONAL_DN
AUTO:
F6 = HORIZONTAL F7 = VERTICAL
F8 = DIAGONAL_UP F9 = DIAGONAL_DN
ALT F6 = REVERSE HORIZONTAL ALT F7 = REVERSE VERTICAL
ALT F8 = REVERSE DIAGONAL_UP ALT F9 = REVERSE DIAGONAL_DN
The MANUAL function keys (F1 - F4) allow you to place a word anywhere
you choose within the puzzle frame. To use the manual direction keys,
first cursor the position in the puzzle where you want the word to
start. Next select a direction by pressing one of the manual direction
keys (F1 - F4). Now you may enter the word. As you type, the cursor will
automatically advance in the selected direction. When you complete the
word press the ENTER key to enter it into the puzzle. The word will then
also appear in the clues column. Continue this procedure to enter as
many words as you wish. You are limited only by the size of the puzzle.
When using the MANUAL REVERSE function keys (ALT F1 - ALT F4) you must
first cursor to the position where the last letter of the word will be.
You may also choose the AUTOPLACE functions for any word while in the
MANUAL mode. Simply select an AUTO direction key (F6 - F9 or ALT F6 -
ALT F9), and enter the word at the prompt. The word will be
automatically placed in the puzzle for you, and added to the clues
list. You may also select the Direction Keys pop-up menu with a mouse or
the Alt D key combination. Using the mouse or arrow keys, highlite the
desired direction and click the left mouse button or press enter. Follow
the above procedure using the menu instead of the function keys.
Whether you choose the MANUAL or AUTO direction keys, the final format
of the selected word is the same. The difference is only whether you
choose where in the puzzle the word is placed or the computer chooses.
See the HORIZONTAL, VERTICAL, DIAGONAL_UP and DIAGONAL_DN Help Topics
for examples of the formats.
If the starting position that you choose for your word entry causes
you to exceed the boundries of the puzzle frame, an ERROR box will
appear instructing you on the proper correction procedure. The
procedure is: Use the backspace key to erase the entry. After erasing
all of the letters, press the ENTER key. Cursor to a new position, and
re-select the direction. Now re-enter the word. See also ERROR MESSAGES
help topic.
IMPORTANT! When Word Search Creator (TM) saves a puzzle file it performs
a screen capture of the puzzle frame and saves this to the .PUZ file. If
you wish to save a puzzle without the random letter fill, you must save
it before pressing F5. If you want the saved file to be the complete
puzzle with the random letter fill then save it after you press F5.
When you are done entering the words for your word search puzzle, press
the F5 key (or select Fill Puzzle with a mouse), Word Search Creator(TM)
will fill all of the blank spaces in the puzzle with random letters. You
are now ready to print the puzzle, or save it with the random letter
fill. Hold down the ALT key and press the F key to access the FILES
functions (or select Files from the top bar with a mouse). A pop up menu
will appear in the upper left corner of the screen. You may select SAVE,
LOAD, PRINT, NEW PUZZLE, EXIT or CANCEL from the FILES menu. To read
more about these functions, select FILES, LOAD, SAVE, PRINT, NEW PUZZLE
or EXIT from the Help Topics menu. CANCEL closes the FILES menu.
-FILES-
To access the FILES menu, hold down the ALT key, and press the F key
(or select Files from the top bar with a mouse). A pop up menu will
appear in the upper left corner of the screen. Five functions are
accessed through the files menu, LOAD, SAVE, PRINT,NEW PUZZLE and EXIT.
(CANCEL closes the menu).Use the UP and DOWN ARROW keys or a mouse to
highlite the function that you wish to perform, then press the ENTER key
or the left mouse button to select. For LOAD or SAVE, a box will appear
in the center of the screen prompting you to enter a file name. You may
enter up to eight characters for the filename. DO NOT enter any
extentsion for the file. The reason for this is that WSC creates and
uses two files for each puzzle that you save, one for the puzzle and
another for the clues. WSC will append the appropriate extentsion to
each file. To satisfy curiousity, these are .PUZ and .CLU. If you wish
to SAVE or LOAD files from another directory you may enter the PATH to
the file. If you don't enter a path the default is the current
directory. Following is an example of saving a file named MYPUZZLE.
To save to the current directory at the Filename prompt type:
mypuzzle
WSC will create the files MYPUZZLE.PUZ, and MYPUZZLE.CLU in the current
directory.
To save to another directory, at the Filename prompt type:
\puzzles\mypuzzle
WSC will create the files MYPUZZLE.PUZ, and MYPUZZLE.CLU and save them
to the PUZZLES directory.
When loading puzzle files follow the same procedure as saving, except
for selecting LOAD from the FILES menu. The prompt boxes for SAVE and
LOAD are alike.
If any file errors occur while loading or saving a puzzle file, an
error message box will appear explaining the problem. See the ERROR
MESSAGES help topic for further explaination.
ALWAYS save your puzzles BEFORE printing them.
If you select PRINT from the FILES menu a box will appear in the center
of the screen asking whether your printer is connected to LPT1 or LPT2.
Enter 1 or 2 for the correct port for your printer. If you are not sure,
try 1 as in most cases this is the correct choice. I really only added
this feature because I have a laser on lpt1 and a dot matrix on lpt2,
this program is designed for dot matrix printers. If you have only one
printer connected, chances are it is connected to lpt1.
Next you will be asked how many copies you wish to print. It would be
wise to enter 1 at this point unless it is a puzzle that you have
already printed. This will allow you to be sure that you like the look
of the puzzle before printing multiple copies. You will be given another
chance to print more copies after printing is finished.
If any error occurs while initializing the printer, an error message
box will appear explaining the problem. See the ERROR MESSAGES help
topic for further explaination.
Selecting NEW PUZZLE from the FILES menu will clear the puzzle frame and
clues list allowing you to start a new puzzle. Always save your work
before selecting NEW PUZZLE, as all data will otherwise be lost.
Selecting EXIT terminates the program.
-LOAD-
To access the FILES menu, hold down the ALT key, and press the F key
(or select Files from the top bar with a mouse). A pop up menu will
appear in the upper left corner of the screen. Five functions are
accessed through the files menu, LOAD, SAVE, PRINT,NEW PUZZLE and EXIT.
Use the UP and DOWN ARROW keys or a mouse to highlite LOAD, then press
the ENTER key or left mouse button to select. A box will appear in the
center of the screen listing the files in the current directory. Using
the arrow keys or mouse, scroll to highlight the desired file name.
Double clicking on the name with a mouse, or pressing the enter key
will load the highlighted file. If you wish to load a puzzle file from
another directory, choose CHANGE DIR from the files menu, and follow the
same procedure as loading a file to change directories. Now when you
select LOAD you will see the files in the new directory.
Once the files are loaded the puzzle will appear in the puzzle frame,
and the clues in the clue list. You may now add to or edit the puzzle.
To make editing easier, the loaded puzzle words will appear in red type.
New words added will be entered in black, like an original puzzle.
If any file errors occur while loading a puzzle file, an error message
box will appear explaining the problem. See the ERROR MESSAGES help
topic for further explaination.
-SAVE-
IMPORTANT! When WSC saves a puzzle file it performs a screen capture of
the puzzle frame and saves this to the .PUZ file. If you wish to save a
puzzle without the random letter fill, you must save it before pressing
F5. If you want the saved file to be the complete puzzle with the random
letter fill then save it after you press F5.
To access the FILES menu, hold down the ALT key, and press the F key
(or select Files from the top bar with a mouse). A pop up menu will
appear in the upper left corner of the screen. Five functions are
accessed through the files menu, LOAD, SAVE, PRINT,NEW PUZZLE and EXIT.
Use the UP and DOWN ARROW keys or a mouse to highlite SAVE, then press
the ENTER key or left mouse button to select. A box will appear in the
center of the screen prompting you to enter a file name. You may enter
up to eight characters for the filename. DO NOT enter any extentsion for
the file. The reason for this is that WSC creates and uses two files for
each puzzle that you save, one for the puzzle and another for the clues.
WSC will append the appropriate extentsions to save each file. To
satisfy curiousity, these are .PUZ and .CLU. If you wish to SAVE files
to another directory you may enter the PATH for the file. If you don't
enter a path the default is the current directory. Following is an
example of saving a file named MYPUZZLE.
To save to the current directory at the Filename prompt type:
mypuzzle
WSC will create the files MYPUZZLE.PUZ, and MYPUZZLE.CLU in the current
directory.
To save to another directory, at the Filename prompt type:
\puzzles\mypuzzle
WSC will create the files MYPUZZLE.PUZ, and MYPUZZLE.CLU and save them
to the PUZZLES directory.
If any file errors occur while saving a puzzle file, an error message
box will appear explaining the problem. See the ERROR MESSAGES help
topic for further explaination.
-PRINT-
IMPORTANT! Always save your puzzles BEFORE printing them.
WSC converts a puzzle into a graphic screen capture format before
printing. It does not go back and reconstruct the puzzle in it's
original form after printing. You must save the puzzle before
printing to be able to reconstruct it after.
To access the FILES menu, hold down the ALT key, and press the F key
(or select Files from the top bar with a mouse). A pop up menu will
appear in the upper left corner of the screen. Five functions are
accessed through the files menu, LOAD, SAVE, PRINT,NEW PUZZLE and EXIT.
Use the UP and DOWN ARROW keys or a mouse to highlite PRINY, then press
the ENTER key or left mouse button to select. A box will appear in the
center of the screen asking whether your printer is connected to LPT1 or
LPT2. Enter 1 or 2 for the correct port for your printer. If you are not
sure, try 1 as in most cases this is the correct choice. I really only
added this feature because I have a laser on lpt1 and a dot matrix on
lpt2, this program is designed for dot matrix printers. If you have only
one printer connected, chances are it is connected to lpt1. Next you
will be asked how many copies you wish to print. It would be wise to
enter 1 at this point unless it is a puzzle that you have already
printed. This will allow you to be sure that you like the look of the
puzzle before printing multiple copies. You will be given another
chance to print more copies after printing is finished. When printing is
completed a box will appear giving you four choices. These are PRINT
MORE COPIES, NEW PUZZLE, HELP or ESC. If you wish to print more copies
press F1 and at the prompt enter the amount of copies you wish to print.
If you press F2 (NEW PUZZLE), you may start another puzzle. Pressing ESC
exits the program. F10 will bring you to HELP from anywhere in the
program.
You may also select any of the above from the top bar with a mouse.
If any error occurs while initializing the printer, an error message
box will appear explaining the problem. See the ERROR MESSAGES help
topic for further explaination.
-DIRECTION KEYS-
Press Alt D,or select Direction Keys with a mouse to open the Direction
Keys menu. Using the mouse or arrow keys, highlite the desired direction
and press the left mouse button or the ENTER key. For AUTO functions an
entry box will appear promting you to enter a word. You may use the
backspace key to edit any errors. When you are finished press ENTER to
enter the word into the puzzle and clues list. For the MANUAL functions
you must first cursor to the position in the puzzle where you want to
place the word. Again, you may use the backspace key to edit any errors.
Once finished, press ENTER to place the word in the puzzle and clues
list.
-LPT1 LPT2-
You are being asked to enter the correct port for your printer. If you
are not sure, enter 1, as most printers are connected to LPT1. If you
are unable to print your puzzle, then try LPT2. If it still won't print
call me.
-NUMBER OF COPIES-
You are being asked how many copies you wish to print. You may enter any
number here as long as you have enough paper to print them on. If you
are printing a new puzzle it is wise to enter 1, and make sure you like
the look of the puzzle before printing multiple copies. You will be
given another chance to print more copies before exiting the program.
-CLUE TITLE-
Enter a word or words that will be printed above the clues. You may use
upper and lower case. Suggestions:
Try to Find These Words:
Words to Find:
The Hidden Words Are:
-TITLE-
Enter a word or words that will be printed above the puzzle as a title.
You may use upper and lower case.
-FILL PUZZLE-
IMPORTANT! When WSC saves a puzzle file it performs a screen capture of
the puzzle frame and saves this to the .PUZ file. If you wish to save a
puzzle without the random letter fill, you must save it before pressing
F5. If you want the saved file to be the complete puzzle with the random
letter fill then save it after you press F5.
Selecting FILL PUZZLE or (F5) will automatically fill all of the blank
spaces in the puzzle with random letters. The fill letters will appear
in light blue, enabling you to still see your puzzle word entries.
-DIAGONAL_UP-
MANUAL:
F3 = DIAGONAL_UP ALT F3 = REVERSE DIAGONAL_UP
AUTO:
F8 = DIAGONAL_UP ALT F8 = REVERSE DIAGONAL_UP
The DIAGONAL_UP places your word in an upward diagonal direction
like this:
D
R
O
W
R
U
O
Y
REVERSE DIAGONAL_UP places your word like this:
Y
O
U
R
W
O
R
D
-DIAGONAL_DN-
MANUAL:
F4 = DIAGONAL_DN ALT F4 = REVERSE DIAGONAL_DN
AUTO:
F9 = DIAGONAL_DN ALT F9 = REVERSE DIAGONAL_DN
The DIAGONAL_DN places your word in a downward diagonal direction
like this:
Y
O
U
R
W
O
R
D
REVERSE DIAGONAL_DN places your word like this:
D
R
O
W
R
U
O
Y
-HORIZONTAL-
MANUAL:
F1 = HORIZONTAL ALT F1 = REVERSE HORIZONTAL
AUTO:
F6 = HORIZONTAL ALT F6 = REVERSE HORIZONTAL
The HORIZONTAL direction places your word horizontally like this:
YOURWORD
REVERSE HORIZONTAL places your word like this:
DROWRUOY
-VERTICAL-
MANUAL:
F2 = VERTICAL ALT F2 = REVERSE VERTICAL
AUTO:
F7 = VERTICAL ALT F7 = REVERSE VERTICAL
The VERTICAL direction places your word vertically like this:
Y
O
U
R
W
O
R
D
REVERSE VERTICAL places your word like this:
D
R
O
W
R
U
O
Y
-REVERSE-WORD-
The REVERSE WORD function enters the word you type into the puzzle in
reverse, but into the clue list in normal format. For example, if you
select Alt F1 and type the word HELLO, it will appear as OLLEH in the
puzzle and as HELLO in the clue list.
To activate the REVERSE WORD function select one of the following key
combinations before entering your word (or use the Direction Keys pop-
up menu by pressing Alt D or selecting Direction Keys with a mouse).
Key Combinations:
MANUAL
ALT F1 = REVERSE HORIZONTAL ALT F2 = REVERSE VERTICAL
ALT F3 = REVERSE DIAGONAL_UP ALT F4 = REVERSE DIAGONAL_DN
AUTO
ALT F6 = REVERSE HORIZONTAL ALT F7 = REVERSE VERTICAL
ALT F8 = REVERSE DIAGONAL_UP ALT F9 = REVERSE DIAGONAL_DN
See the HORIZONTAL, VERTICAL, DIAGONAL_UP or DIAGONAL_DN Help Topics
for examples of the formats.
-EDIT-
The EDIT function is probably the most complicated function in the
entire program. If you make a spelling error, and don't catch it before
you press the enter key, or simply wish to change a word, you will have
to use the EDIT function. To edit an entry, you must edit both the word
in the puzzle and in the clue list. If you only change the word in the
puzzle you will end up printing extra clues.
To access the EDIT function hold down the ALT key and press E or select
Edit from the top bar with a mouse. A box will appear instructing you to
use the UP and DOWN arrow keys to highlite the word you wish to edit. As
you press an arrow key the highlite bar moves up or down the clue list.
When the word that you wish to edit is highlited, press the ENTER key.
A second box will appear listing the deleted clue, and asking you to
enter the new clue. Type in the new word. You may use upper or lower
case as it will be converted to upper case in the clue list.
Now a third box will appear instructing you on the procedure for editing
the word in the puzzle. After you press any key to close the box, cursor
to a letter in the word that needs to be changed or deleted. Use the DEL
(delete) key to erase the letter. Next , with the cursor in the same
position, press the INS (insert) key and then the new letter. Repeat
this procedure until the word appears correct in the puzzle. Do not
press the ENTER key until you are done, as this will cause you to exit
the EDIT mode. Once you are finished editing the word press the ENTER
key and you will be returned to normal puzzle entry functions.
When editing a word in the puzzle frame, you may also do the following.
Using the DEL key you may erase the entire word and cursor to a new
starting position. Next press the INS key and a then a letter. Cursor
in any direction to the position for the next letter and repeat the
process until the word is complete. Now press the enter key to exit the
EDIT mode. Any extra letters may be deleted without inserting new ones
before pressing the ENTER key.
-HELP-
With the keyboard:
To access the help utility press F10. Help may be accessed from anywhere
in the program, as long as a help box or error message aren't currently
being displayed. When you press the F10 key a box containing a HELP
TOPICS menu will appear. Using the arrow keys, highlite the topic that
you wish to view, and press ENTER. The chosen topic will be loaded in
the help viewing screen. You may use the UP and DOWN arrow keys to
scroll through the topic. The PAGE UP, PAGE DOWN, HOME and END keys are
also operational while in the help screen. No matter which topic you
entered the help file on, you may use these keys to browse through the
entire file. The UP and DOWN arrow keys will call up a highlite bar to
let you now where in the file the cursor is. This is also helpful in
reading the file, as you may highlite the line that you are reading.
Press ESC to exit help.
With a mouse:
Click on Help on the top bar, and a topics menu will appear. Double
click on the tipic you wish to see. In the main help screen you will
see small red boxes with arrows on the right bar of the box. The larger
blue arrows are for page up and page down. The smaller white ones
are for scrolling up and down. Clicking on QUIT HELP in the red box at
the bottom will exit the help screen.
-ERROR MESSAGES-
There are three main types of error messages that you may encounter in
WSC. These are FILE, PRINTER, or the WORD WON'T FIT message. There are
three types of file error messages, UNABLE TO LOCATE FILE, FILE CLOSE
ERROR and FILE READ ERROR. Probable causes are listed in the box if
appropriate. The UNABLE TO LOCATE FILE message will appear if WSC is
unable to open the file that you request. The most likely causes are
a typo in the entry, or an improper path to the file. The FILE READ or
FILE CLOSE errors may be caused by a corrupted file or insufficient
memory.
The UNABLE TO OPEN PRINTER error message may have four possible causes.
The printer is not turned on, or improperly connected. The wrong port
was selected. The printer doesn't recognize the epson escape sequences
(most printers do). Or there is a physical problem or defect in the
printer.
The WORD WILL NOT FIT message will appear in the MANUAL puzzle mode if
your word entry exceeds the boundries of the puzzle frame. You are
instructed to use the backspace key to erase the entry and cursor to a
new location to re-enter the word.
-COMPATABILITY-
An IBM compatible computer with a floppy drive (hard drive prefered),
with an EGA or VGA monitor, a dot matrix printer (epson compatable)and
384K available memory are required to run Word Search Creator (TM).
-WORD WILL NOT FIT-
The WORD WILL NOT FIT message will appear in the MANUAL puzzle mode if
your word entry exceeds the boundries of the puzzle frame. You are
instructed to use the backspace key to erase the entry and cursor to a
new location to re-enter the word.
-COMING SOON-
Projects that are in the works now and will be available soon are:
Laser printer support for Word Search Creator (TM). A Windows version of
Word Search Creator (TM). And in the design stages Word Puzzle Master
(TM) which is similar to Word Search Creator (TM) but with more puzzle
templates, such as crosswords, word jumbles and more.
Registered users will be kept informed as new products are released.
Registered users will also be offered significant discounts on new
products, as well as upgrades on most registered products for only ten
dollars. As a registered user you will also recieve bound and
illustrated manual.
Thank you for trying Word Search Creator (TM) Version 2.5. Please pass
it along.
John Owen
To obtain your REGISTERED copy of the LATEST VERSION of Word Search
Creator (TM) send a check or money order $29.00 (USA and CANADA)
$31.00 (OVERSEAS), ($25.00 plus P&H) to:
OWEN ASSOCIATES
PO Box 307
New Milford, CT 06776, USA
Please type or print clearly your name, address, and disk size(3 1/2
or 5 1/4). Or type REGISTER at the prompt to automatically print a
registration form.
-----------------------------------------------------------------------
CREDIT CARD ORDERS ONLY -
You can order with MC, Visa, Amex, or Discover from Public (software)
Library by calling 800-2424-PsL or 713-524-6394 or by FAX to
713-524-6398 or by CIS Email to 71355,470. You can also mail credit card
orders to PsL at P.O.Box 35705, Houston, TX 77235-5705. Refer to product
#10812 Word Search Creator(TM), and specify disk size.
THE ABOVE NUMBERS ARE FOR ORDERS ONLY.
Any questions about the status of the shipment of the order, refunds,
registration options, product details, technical support, volume
discounts, dealer pricing, site licenses, etc, must be directed to:
Owen Associates
PO Box 307
New Milford, CT 06776, USA
Voice phone (203) 350 - 2194 or CIS Email to John Owen 71613,3027
"To insure that you get the latest version, PsL will notify us the day
of your order and we will ship the product directly to you."
-----------------------------------------------------------------------